Typical Physical Properties for our Epoxy Terrazzo # 1100

Product Description

Thin-Set Epoxy Terrazzo #1100 is a decorative flooring system combining 100% solids, VOC free, pigmented epoxy resin with colored marble, glass chips or other approved aggregates in a troweled mortar system. This mortar is then ground and polished to reveal the natural beauty of the aggregates surrounded by the coordinating epoxy matrix. Available with 100% solids flexible epoxy membrane for added adhesion, toughness, durability, waterproofing, and crack isolation.

Epoxy Membrane with 1/4" or 3/8" Thin-set Terrazzo Flooring System

Typical Physical Properties
Binder Resin Color	Custom color matching available upon request Can match Sherwin-Williams paint colors, NTMA and TTMAC standard color plates
Hardness, @ 24 hours Shore D ASTM D 2240	85/65
Compressive Strength ASTM D 695	10,000 psi
Tensile Elongation % ASTM D 638	2-4
Tensile Strength ASTM C 307 ASTM D 638	2,500 psi 6,000 psi
Water Absorption, % ASTM D 570	0.10
Adhesion ACI 503R	350 psi 100% concrete failure
Abrasion Resistance ASTM D 4060, CS-17 Wheel	70-90 milligrams lost
Flammability ASTM D 635	Self-extinguishing over concrete
Flexural Strength ASTM C 580 ASTM D 790	4,500 psi 10,000 psi
Impact Resistance MIL-D-3134, Sec. 4.7.3	Withstands 16 ft.-lbs. without cracking, delamination or chipping
Resistance to Elevated Temperatures MIL-D-3134J	No slip or flow at required temperature of 158°F
Slip Resistance	Meets ADA Standards
ASTM C = Mortar System ASTM D = Resin Only

 

Courtesy of  General Polymers^®

Contact Us

Email Us